New Products

Spring Testing Machine

Guilin Wintime Testing Machine Co. Ltd. has developed a computer-controlled spring testing machine, TCD-CH-200KN. It is designed to perform testing on compression and extension springs of heavy duty and heavy load, especially to test the axial and lateral load and lateral displacement of railway springs according to EN13298. The TCD-CH-200KN features a highly rigid column structure design, with patented technologies such as a crossbeam vibration reduction system and double cycloidal reducers, to provide a stable test under high speed and with a large load. A servo-drive controls the frame’s loading crosshead for fully automatic load testing with speeds up to 500mm/min. It manages and automates the entire spring testing process, with functions of testing the axial and lateral load, and lateral displacement; setting the height or traveling to check the load; setting the load to check the height; testing the free length and solid length; and more. For information, contact Guilin Wintime by phone at ++86-773-5839233 or Web site at www.wtmtest.cn.

Belt Conveyor Oven

The Grieve Corp. has introduced the No. 820 550°F electric belt conveyor oven. Workloads travel atop an 84-inch-wide carbon steel flat wire conveyor belt with ½ HP motor drive, variable from 2.9 to eight feet per minute, through a six-foot-long open unloading zone. The 360 kW power is installed in Incoloy-sheathed tubular heating elements, while a 24,500 CFM, 20 HP recirculating blower provides vertical downward airflow onto the workload. The oven features a welded aluminized steel exterior, Type 430 stainless steel interior, four-inch insulated walls and structural steel channel base. Safety equipment includes a digital indicating temperature controller, manual reset excess temperature controller with separate heating element control contactors, recirculation blower airflow safety switch, and an exhaust hood over each end equipped with an axial fan. For information, contact Grieve by phone at (847) 546-8225 or fax at (847) 546-9210.

Stick Lubricant

ITW Rocol North America has developed Accu-Lube Stick, an environmentally friendly, ready-to-use stick lubricant that is applied to the tool before startup. It can be used on grinding wheels to allow them to cut freely and improve wheel life. Accu-Lube Stick enhances finishes for belt grinding and increases belt life. It can also be used on saw blades to improve blade life. It reduces heat buildup in belt, disc or wheel grinding operations and is safe for all metals, including aluminum. Accu-Lube Stick does not need to be diluted with any other material, and does not cause contamination or discoloration of products. Since it is biodegradable, non-toxic and naturally consumed in the process, the need for cleanup and disposal is eliminated. For information, contact ITW by phone at (847) 657-6185 or fax at (800) 952-5823.

Slip Resistance Matting

Plastex Matting Inc. has announced the U.S. availability of Vynagrip slip-resistance matting through its Alabama manufacturing facility. Vynagrip is suitable for any manufacturing or industrial environment, including inclines. It features a firm tread and open grid for debris collection in dry spaces or rapid drainage in wet spaces, indoors or out. In addition to accident prevention, it has been scientifically proven in a University of Hertfordshire, England, study to reduce standing fatigue. Vynagrip is chemical, oil and acid resistant. It is available in full 33-foot long rolls and half rolls, in widths of two, three or four feet. Vynagrip contours to uneven floors and cuts to fit odd-shaped spaces. For information, contact Plastex Matting Inc. by phone at (256) 845-7725 or e-mail at sales@plastexmatting.com.

Strip Steel Brochure

Blue Blade Steel, a producer of heat-treated high-carbon and alloy strip steel, has published a brochure detailing its value-added services. This includes in-house services and custom heat-treating processes in addition to oscillated coils to reduce coil changeover time and labor requirements. For information, contact Blue Blade by phone at (908) 272-2620 or Web site at www.bluebladesteel.com.

Hand Protection

Ansell Ltd. has introduced HyFlex 11-624 gloves that offer cut resistance along with comfort, flexibility and durability. This addition to the HyFlex line features an exclusive knit liner combination DSM Dyneema, Spandex and nylon to provide workers with ANSI Level 2 cut protection to safely handle sharp objects such as metal, glass, plastics and ceramics. The lightweight, black polyurethane coating assures a medium high level of abrasion resistance and a sure grip in light oil and dry applications. Because Dyneema is unaffected by water or detergents, HyFlex 11-627 gloves can be washed and re-used without losing any cut protection. For information, contact Ansell by phone at (800) 800-0444 or Web site at www.ansellpro.com/hyflex.

Alarm and Shutdown Protection

IMI Sensors, a division of PCB Piezotronics, has developed the Series 684 vibration alarm module to provide machine shutdown protection when increased vibration levels signify potential failure. These modules are available in various sizes and include up to eight channels in a single NEMA 4X enclosure. ICP (IEPE) Piezolectric or 4-20 mA sensors interface directly with the system, which is universally powered and provides appropriate excitation voltages. Within each indicator channel is up to four form C relays, for alarm or shutdown control.

Each meter has the ability to integrate an acceleration signal and display the units in acceleration, velocity, or displacement on the highly visible, bright display. Series 684A vibration alarm modules also conform to applicable European Directives for CE marking. For information, contact IMI Sensors by phone at
(800) 959-4464 or Web site at www.pcb.com.

Inks for Ink-Jet Systems

Matthews Marking Products has introduced the SCP-800 series of inks for use with existing Drop-on-Demand ink-jet systems. Formulated to provide a strong contrast, these pigmented inks are available in light blue, yellow, and white for marking on a comprehensive range of materials. They are well-suited for non-porous surfaces, such as metal, plastic and rubber. The SCP-800 series provides good adhesion as well as abrasion resistance. In addition, these inks provide UV and weathering resistance. For information, contact Matthews Marking Products by phone at (412) 665-2500 or Web site at www.matthewsmarking.com.

Inspection System

Dunkley International Inc. has introduced an automated vision system that is capable of sorting fasteners up to 10 times the speed of previous machines. The Cyprovision Mach 7 model is versatile, capable of inspecting a variety of metal parts at unusually high rates of throughput. Marketed under the brand name Cyprovision, the machine can inspect up to 3,000 pieces per minute (compared with the 300-per-minute rate of former turnkey machines). It is not suitable for parts that can easily interlock or tangle. An operator is required only to participate in the material handling of the fully weight-counted boxes after machine inspection. For information, contact Dunkley International by phone at (269) 343-5583 or fax at (269) 343-5614.

Trade Finance Guide

The U.S. Department of Commerce, International Trade Administration (ITA) Office of Finance, has published the Trade Finance Guide: A Quick Reference for U.S. Exporters. The guide, developed with the assistance of the FCIB, the association of executives in Finance, Credit and International Business, is designed to be a comprehensive, informative and easy-to-understand tool created specifically for U.S. small and medium-sized enterprises (SMEs).

Franklin Lavin, commerce undersecretary for international trade, says, “By taking advantage of this tool, U.S. exporters can learn how to turn overseas opportunities into actual sales and profits.” The guide is available online at http://trade.gov/media/publications/abstract/trade_finance_guide2007desc.html. Exporters can also obtain a copy from the Trade Information Center or through the Commercial Service’s network of domestic Export Assistance Centers, or by contacting FCIB at info@fcibglobal.com.

Workbench Organizer

IAC Industries has introduced the Multi-Task System, MTS, to clear clutter from workbench surfaces. The MTS is an upper structure for stand-alone workbenches that creates a vertical area above the work surface for storage units, shelving, parts cups, electrical outlets, lighting and other accessories. It attaches to the rear of the work surface or workbench frame and is available in multiple lengths to fit 48-, 60-, 72- and 96-inch workbenches.

IAC also introduced angled workbenches, including sectional tilt tops, indexing rotary surfaces, PCB rails, and embedded roller conveyors or ball transfer systems. Each enables users to adjust the work surface position or the product itself for easy assembly and manipulation. The tilt top has 13 adjustments; the rotary surface is a circular system built flush into the work surface; and for circuit board assembly, IAC offers a slide rail system. The movement of heavier items is eased with either roller conveyor systems or the ball transfer systems. For information, contact IAC by phone at (714) 990-8997 or Web site at www.IACindustries.com.

Liquid Waste Management

New Pig Corp. has designed a collection center and pump system to transfer and collect waste liquids. Heavy-duty components can be integrated into any workspace or existing system for safer, cleaner and more efficient liquid waste management. The collection center’s components include the seven-gallon Pigr Burplessr Waste Collection Center, the Pigr Evacuation Pump Kit, and a variety of safety and efficiency enhancing accessories, sold separately. This system can be permanently wall mounted or used portably for increased flexibility wherever liquids need to be collected or transferred. This system helps to reduce the need for carrying and lifting heavy, cumbersome containers and can help prevent injuries, drips and spills. For information, contact New Pig Corp. by phone at (800) 468-4647 or e-mail at hothogs@newpig.com.

Tote Box Carriers

Eagle MHC has developed tote box carriers for storage and handling of components. The tote box carriers are built for durability, featuring chrome-plated steel posts and frames. Each carrier comes with casters for portability, and fits a variety of totes, trays and other slide containers. Standard models come with three sets of adjustable tote-box slides.

Also offered are bench-side tote box carriers. These models, featuring a variable shelf angle that is ergonomically sensitive, are designed to facilitate repetitive pick-and-place activities. Tote boxes and accessory items are also offered, as are custom configurations. For information, contact Eagle by phone at (800) 637-5100 or Web site at www.eaglegrp.com.